1. Power supply voltage:
AC220V/110V 50HZ / 60 HZ ,Power: 1500W
2. Blood pump/spare pump:
•Flux: 15 ~ 340ml/min (D 6mm)
20 ~ 460 ml/min (D 8mm)
3. Heparin pump:
•Flux: 0ml/h~10ml/h(±5%)
•Precise: 0.1ml/h
Injector size: 20ml/30ml/50ml
10ml/20ml/30ml (selectable)
4. Arterial pressure:
•display scope:-300mmHg~+300mmHg
(±10mmHg)
5. Venous pressure:
•display scope:-50mmHg~+300mmHg
(±10mmHg)
body fluids processing oxygenator dialysis solution
6. Dialysate flow:
300ml/min~800ml/min linearity adjustable (+10%) (-5%)
Temperature:35.0℃~39.0℃
Resolving rate:0.1℃
Conductivity:13mS/cm~15.5mS/cm (±0.1 mS/cm)
7. UF flow scope: 0~1800ml/h(±30ml/h )
0~4000ml/h(optional)
8. ISO UF flow scope:0~2000ml/h(±30ml/h)
9. TMP: Scope:-100mmHg~+600mmHg (±20mmHg)
10. Blood leakage monitor:
over 1ml blood per liter dialysate (flow:500ml/min)
11. Blood level monitor: ultrasonic sensor
12. Air bubble monitor:
Infrared and response threshold value:
Single air bubble of 200 I exists when
Blood flux is 200ml/min
13. Inflow pressure:0MPa~0.6MPa
14. Inflow temperature: 5℃~30℃
15. Environment temperature: 10℃~30℃,
Relative humidity≤70%
16. Rinse/disinfection: chemical disinfection
(citric acid,peracetic acid and oxalic acid)